| 1. | Code that the processor jumps to on receipt of an interrupt request 使处理器跳转到中断请求接收的编码。 |
| 2. | Irq interrupt request line 中断请求线路 |
| 3. | Attentions , such as client - interrupt requests or broken client connections 需要关注的消息,如客户端中断请求或客户端连接中断。 |
| 4. | In computing , an interrupt request by a peripheral unit , as opposed to a software interrupt written into a computer program 在计算机系统中,由外部设备引起的一种中断请求,它与编写在计算机程序中的软件中断不同。 |
| 5. | You ' ll learn the details about interrupt request level ( irql ) and about various synchronization primitives that the operating system offers for your use 你将学习到有关终端请求级别的细节( irql )以及操作系统为你的使用提供的各种基本同步。 |
| 6. | To do this , if you have an existing operating system , use it to obtain the current settings , such as memory address and interrupt request ( irq ) , used with your devices 要这样做,如果已存在一个操作系统,使用这个清单可以获得设备当前使用的设置,例如内存地址和终端请求( irq ) 。 |
| 7. | Finally , this paper discussed the software system design based on above hardware platform , including the dsp initialization program , the interrupt request service and speech coding 最后讨论了基于上述硬件系统的软件设计,主要分为三个部分: dsp的初始化程序、中断服务程序和语音编解码程序。 |
| 8. | When at all possible verify that in “ device manager ” “ view / resources by type / interrupt request ( irq ) ” that your audio card is sitting on its own irq number and that this number is not assigned to any other devices 在“设备管理器”中选择“按种类排列/中断请求” ,确定你的声卡有自己的中断请求号码,且此号码与其他设备无关。 |
| 9. | It helps to enhance the reliability of the system and reduce the maintenance cost . the timer interface module generates interrupt request every 25us , which is fine enough comparing with 1 oous and used as one - step in adjusting commutation periods 本系统在软件设计时,定时器中断时间由100us缩短到25us ,一个定时器中断时间为相位调节中的一步,这样就提高了相位调节精度。 |
| 10. | When the light wavelength permeating the f - p filter equals to the bragg reflection wavelength , there is an interrupt request signal , dsp deals with the useful information after dsp answers interruption , and then obtain the corresponding changes of the measured parameters 当透过f - p滤波器的光波长与bragg反射波长重合时,就产生中断请求信号, dsp响应中断后就对有用的信息进行处理,进而得到相应被测参量的变化。 |